Valerion is rolling out a new software update for its VisionMaster Max, Pro 2, Pro, Plus 2, and Plus projectors. Labeled Q0718, this OTA3 firmware update dated July 18, 2026, introduces several improvements related to image quality, keystone adjustment, operating noise, and home automation integration. The Valerion Max also benefits from a feature exclusive to this model: dynamic iris.
Dynamic Iris exclusive to the Valerion Max
The main new feature of firmware Q0718 concerns the Valerion Max with the introduction of dynamic iris. Once enabled from the Projector menu, this feature automatically adjusts the iris aperture based on the brightness of the displayed image. This functionality is designed to continuously adapt the projector’s optical performance to the content being displayed.
EBL processing is also evolving with the introduction of a “Medium” setting. This intermediate setting applies moderate modulation of the laser brightness. Valerion describes it as a compromise between the Low EBL and High EBL modes, with the goal of limiting visible brightness fluctuations while maintaining contrast in dark scenes.
Another change related to the image: automatic dimming in dark scenes is disabled to maintain a stable brightness level. The aspect ratio setting is now also available in Dolby Vision.
8-point keystone correction and new anamorphic formats
Firmware version Q0718 adds 8-point manual keystone correction. This feature complements existing correction systems by offering additional adjustment zones to fine-tune the image geometry. It is particularly well-suited for installations that require precise positioning.
Enabling this 8-point correction resets the settings from the 4-point calibration and automatic calibration, and vice versa. Users should therefore select the calibration mode appropriate for their setup before making any adjustments.
Valerion also adds the 2.0:1 and 1.85:1 anamorphic aspect ratios to the image format settings. These options are designed for setups equipped with an anamorphic lens and expand the range of options for adapting to different screen aspect ratios.
Noise reduction, ThunderBeat, and eye protection
A new operating noise reduction feature has been introduced. Once enabled, it adjusts the projector’s operation using dedicated algorithms. The laser luminance level is then automatically controlled. The manufacturer notes that it may take some time for the noise reduction to take effect after it is activated.
The Valerion ThunderBeat audio system also has its own menu in the projector’s OSD interface. This allows users to access the audio system settings directly from the “Display & Sound” section.
In addition, the eye protection feature now offers three modes: Off, Carefree, and Focus. In Carefree mode, the display turns off immediately when an obstacle is detected in front of the projector. Focus mode works the same way but includes a delay before the display turns off.
AWOL Link home automation and how to update the projector
The firmware also introduces support for AWOL Link, a home automation system based on the AWOL IP control protocol. This feature allows the projector to be integrated into a connected home environment and controlled from smart devices, including a smartphone. Infrared codes for universal or programmable remote controls are also included in this version.
The Q0718 update can be installed directly by OTA from the system settings. The automatic rollout is taking place gradually and may take one to two weeks, depending on Google’s OTA schedule. Installation via a FAT32 USB drive is still possible to access the firmware directly. The final version to check after installation is V0000.01.00E.Q0718, with a prefix that may vary depending on the model.
The update also fixes 3D resolution issues in scenes using the Frame Packing format.
In summary
With firmware version Q0718, Valerion primarily expands the adjustment capabilities of its projectors. The VisionMaster Max’s dynamic iris, the new Medium EBL level, 8-point keystone correction, and additional anamorphic formats directly impact image reproduction and installation. Added to these are noise reduction, new eye protection settings, access to the ThunderBeat menu, and AWOL Link compatibility. Together, these features represent a software update focused on customizing the projector’s operation and integrating it into a home theater setup.
